|
Remote operation of Pool/ Spa lights and pumps
How to do it..........
Pool Lighting Control, Wall Mounted Remote
-
Replace the existing pool light switch with an XPS3 20 Amp Wall Switch.
-
In the new remote switch
location (s), install a single gang switch box, pulling in a hot and neutral wire from any convenient location. This is usually accomplished by pulling wire from an outlet nearby the new remote switch
location (s).
-
Install an XPT1, 1 Button Base Controller
and set the Code Wheels to match the
X10 PRO Switch.
Pool Lighting Control, Wireless Handheld, Keychain or Wall RF Remote
-
Replace the existing pool light switch with an XPS3 20 Amp Wall Switch.
-
Plug in a PAT01 RF Base Transceiver in a convenient outlet inside the home closer to the pool area for
maximum performance.
-
Select either the PHR03 Handheld Remote or PHR04 (water resistant) Keychain Remote or PHW04D Wireless Wall Transmitter).
• The buttons on the
Remote (s) correspond with the Code Wheel numbers selected on the
XPS3 Wall Switch.
|
|
 Installation Options...
• New Construction
or Remodel
- Install an XPS2 240V Pump Switch
in either
your pool sub panel
or a junction box.
- Place a XPMT1 Counter-top Mini-Timer
in a convenient location
inside the home and plug
it into an electrical outlet.
- Set the clock on the Mini-Timer. Follow the included instructions and program ON/OFF times for your pool pump.
• Pool Pump Control, Retrofit
Existing
- Remove the existing mechanical timer from the timer housing.
- Install an XPS2 240V Pump Switch
on a PTB01
Bracket.
- Mount the PTB01 Bracket in the existing box, making the appropriate wire connections.
• The Mini Timer can be set for up to 64 events times per day, allowing the
pump (s) to be turned off during peak times while accommodating other client “at home” times.
•Two XPS2 240V Pump Switches can be installed in series for pools with both circulation pumps and cleaner pumps. Be certain not to exceed the 20 Amp rating of the first switch in series.
• The PTB01 (quick snap in upgrade) Bracket is specifically designed to hold two switches for mult - pump systems or for pump & light switch combinations.
|
